久久人人爽人人爽人人片av麻烦|人人澡人摸人人添欧美|亚洲国产成人7777在线播放|一级特黄aa黑寡妇大片欧美|

首頁 產品展示>John Deere柴油機連桿與活塞銷/活塞環的裝配與標準值參數

John Deere柴油機連桿與活塞銷/活塞環的裝配與標準值參數

John Deere柴油機連桿與活塞銷的裝配與標準值參數,John Deere柴油機連桿與活塞銷的裝配與標準值參數技術支持,John Deere柴油機連桿與活塞銷的裝配與標準值參數費用,John Deere柴油機連桿與活塞銷的裝配與標準值參數服務中心,John Deere柴油機連桿與活塞銷的裝配與標準值參數價格規格資料查詢,John Deere柴油機連桿與活塞銷的裝配與標準值參數哪里有,John Deere柴油機連桿與活塞銷的裝配與標準值參數多少錢,John Deere柴油機連桿與活塞銷的裝配與標準值參數附近聯系電話,寧波日昕動力科技有限公司
產品咨詢

詳細描述

John Deere約翰迪爾強鹿柴油機連桿與活塞銷、活塞環的裝配與標準值參數

IMPORTANT: There are different manufacturers/part numbers for piston and liner sets. These sets are not interchangeable. DO

NOT intermix piston/liner sets on the same engine. Check parts catalog for correct applications.

IMPORTANT: If a new piston and liner assembly is to be installed, DO NOT remove piston from liner. Push piston out of liner bottom only far enough to install piston pin.

1. Lubricate piston pin and bushing with clean engine oil.

IMPORTANT: Pistons must be installed on connecting rods from which they were removed, and new piston pin snap rings must be used. Piston and connecting rod must be assembled so combustion bowl in piston is offset toward fuel injection pump side of engine when long side of connecting rod is toward the camshaft side of engine.

NOTE: Some pistons are marked with an arrow on top of piston. Arrow must point to side marked “FRONT” on connecting rod when assembled.

2. Assemble pistons and connecting rods, making sure the word “FRONT” (A) on side of piston and side of connecting rod are facing same direction.

3. Insert piston pin (B) into piston pin bore. NOTE: Some piston pin snap rings have sharp edges on both sides. These rings are reversible.

4. Install NEW piston pin snap rings with ring gap (C) facing down to the 6 o’clock position at bottom of piston (viewed from rod end) and sharp edge of ring facing away from piston pin. Make sure snap rings are seated in grooves of piston pin bore.

活塞環的安裝方法

IMPORTANT: Piston rings can be damaged if

expanded too far. Expand piston rings

only as far as necessary to install rings

on piston.

1. When installing new piston rings, use JDE85, JDE135,or KJD10140 Piston Ring Expander. Install oil ringexpander in bottom ring groove. Position end gaptoward either side of piston pin.

2. Install oil control ring (C) in bottom ring groove overring expander. Install with end gap on opposite side ofpiston from ring expander gap.

NOTE: Identify ring top as follows:If ring has no marks, it can be installed with eitherside facing top.If rings are marked with depression (“pip”), markshould be on top as shown (A). Ring with twodepression marks goes in the second groove.If ring is marked with paint strip, hold ring withgap facing you and turn ring so that paint strip isto the left side of gap.

3. Identify top side of compression rings. Top side ofrectangular and keystone compression rings will beidentified by marks on the top side of two rings.

4. Install rectangular compression ring (B) in center ringgroove with top of ring toward top of piston.

5. Position gap in rectangular compression ring onopposite side of piston from oil control ring (C) gap.

6. Install keystone compression ring (D) in top ring groovewith top of ring toward top of piston.

7. Position gap in keystone compression ring on oppositeside of piston from rectangular compression ring gap.

8. Stagger ring gaps on pistons as shown.

9. Coat pistons, liners and inside of JDE84 Piston RingCompressor with clean engine oil.

A—Piston Head

B—Top Compression Ring

C—Oil Control Ring Gap

D—Expander Ring Gap

E—Bottom Compression Ring Gap

F—Front of Engine

免費熱線
400-100-8969???15088860848
機組銷售
0574-26871589? 15267810868
配件銷售
0574-26886646? 15706865167
維修熱線
0574-26871569  18658287286
手機端
微信公眾號
在線客服
牙克石市| 靖安县| 潢川县| 高陵县| 海南省| 修武县| 禄丰县| 新野县| 西城区| 镇康县| 萝北县| 台中县| 东乡县| 东乌珠穆沁旗| 台湾省| 宣恩县| 紫阳县| 澄城县| 绥棱县| 灵武市| 长白| 锦屏县| 施秉县| 南靖县| 屯留县| 额敏县| 孟村| 岐山县| 富阳市| 佳木斯市| 巧家县| 辉县市| 萨迦县| 南京市| 崇信县| 天台县| 平利县| 贡山| 炉霍县| 龙里县| 杭锦后旗|